You must have javascript enabled to use treadmillsi.com !

TreadMill 1 hp 115 volt electric DC /AC* permanent magnet motor

generator 12mm

USD $139.99

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Business & Industrial / Industrial Automation & Motion Controls / Electric Motors / General Purpose Motors

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
GREAT FOR WIND TURBINE PROJECTS You are bidding on a 1 HP / 115 volt DC / 800 Watt peak electric motor.   Very powerful for it's size. Also run them on AC voltage too: For household voltage range 110/115/120/125 VAC power run them with the use of a full wave rectifier which turns AC voltage into DC voltage . SEE HOW - Can also be used as a generator for making Electricity (needs diode) see video below. https://youtu.be/PzDN_jmQvzo Can also be used for powering electric karts and bikes. Can also be used for making Electricity (needs diode) and changing a battery. Great for wind or hydro. NOTE: For wind or hydro power we recommend only our 115 or 208 volt models. (Use FULL WAVE RECTIFIER on the higher voltage models and run them on AC wall current within their respective voltage groups) For go karts, mini bikes and cycles we recommend our 12, 24 and 48 volt models that correspond to your battery bank voltage. We also sell a 90 volt DC version great for DC water pumps and hydraulic motors Specifications: Motor length 3.5" diameter / 6" long. 7.5" over all length including shaft (800W peak) - Peak Amps is Watts divided by volts.  W ÷ V = A 12mm shaft with 1.75 pitch threads with flat slot at shaft tip. Shaft is 1.5" long with 3/4" long threaded end (12mm/1.75 pitch thread by 3/4" long) Two 5/16" extra large mounting holes on the front of the motor. 5/16" NCT mounting holes are 2.874" from center to center (74mm) 3000 rpm  / continuous duty at 75% of peak wattage. Heavy 10 AWG wire to handle the amps. A put-up and forget design! Expect decades of dependable service life.
  • Rain, ice and weather resistant electronics in sealed case (not for under water)
  • Long life graphite brushes. We sell replacement brushes and bearings.
  • Works for both CW or CCW rotations.
  • Epoxy/Lam rotor efficiency = 94.6% (Brushed motors convert more electricity into usable horsepower)
  • Weighs ONLY 8.5 lbs.  (Almost 100 Watts Per Pound !)
  • Can be used as a generator, makes power when turned (Requires 100 amp blocking diode)
  • THIS IS NOT A 3/4" Diameter SHAFT.
  • PRODUCT IDEAS BUILD ELECTRIC CARS / INVENT ELECTRIC BOATS / DESIGN ELECTRIC MOTORCYCLES / MINI BIKES /  GO KARTS / POWERED BICYCLES and WIND TURBINEs We want you to use these motors in your product designs to help mankind as we slowly run out of cheap fossil fuels -  Electricity is the future. HOW TO MAKE A TREAD MILL MOTOR WIND TURBINE Love these blades you were right, wow can they turn on, im getting up to 40 volts out of my indiana general dv pm motor,there scarey sometimes, im putting it on youtube for all to see, thanks again -uptick57 Video
    wind generator homemade - YouTube
    Video will open in a new window
    Using the Pricetronic App? Paste link into a browser window: [isdntekvideo] https://youtu.be/WCkpjHPna-Y

    Returns Accepted for this item if it's within 30 Days

    TreadMill 1 hp 115 volt electric DC  /AC* permanent magnet motor generator 12mm
    See more
    Price type
    IN STOCK OUT STOCK